A Comprehensive Guide to Different Waterproofing Methods

It is essential to give serious consideration to waterproofing buildings since doing so creates an impenetrable barrier against water that extends over foundations, roofs, and walls. The following are some of the most frequent types of waterproofing materials utilised in the construction of buildings by waterproofing companies in Abu Dhabi.

Methods of Waterproofing

Waterproofing Using Cementitious Materials

This is the simplest way because the components can be purchased from masonry product providers without much trouble. In addition to this, they are simple to combine and apply in internal moist locations such as restrooms. This approach, on the other hand, does not go through the process of contracting and expanding since it is not subjected to the effects of weathering and sunshine.

In structures like bridges, dams, sewage and water treatment plants, and tunnels, a cementitious method of waterproofing can be utilised for the installation of a waterproof deck covering.

Waterproofing Membrane in Liquid Form

The application of the priming coat and the top coats of this type of coating can be done with a roller, a spray gun, or a trowel. This type of waterproofing provided by waterproofing companies in Abu Dhabi has greater flexibility when compared to cementitious methods. When the liquid dries, it will leave behind a coating on your wall that is similar to a rubbery substance.

In point of fact, the elongation properties of such a procedure will achieve a maximum of 280 percent of their maximum potential. However, this will be contingent on the sort of polymer that is utilised by the producer in the application of liquid waterproofing.

Waterproofing provided by a bituminous coating

A bituminous coating is an additional method that can be utilised to waterproof a building construction. Flexibility and resistance to water are provided by the reinforced fibre characteristics and polymer grade of this material. Asphalt coating is another name for this technique, which achieves outstanding results when applied to concrete foundations.

When exposed to sunlight, however, the bitumen-based materials that are used in the production of this sort of coating choice could not be suitable. This is because, with time, it weakens and becomes brittle, making it more susceptible to breakage. You have the option of modifying it by utilising more flexible materials such as acrylic or polymers based on polyurethane.

Waterproofing Properties of a Bituminous Membrane

If you want a deck coating that is waterproof, you can use this procedure because it has been shown to be effective even for low-slope roofs and has been used for those roofs before. Because it is made of asphalt, filler, and polymers, it has a natural tendency to stick to itself. In addition to that, it has specific oils and resins added to it so that it will adhere better.

In addition to that, the torch on the membrane can be either covered or exposed. Due to the mineral granular aggregate, the exposed type is able to survive the wear and tear that is caused by the natural process of weathering.

Waterproofing by means of a Polyurethane Liquid Membrane

The polyurethane liquid membrane is an additional type of waterproofing that can be utilised, however this method does come at a higher cost. In general, it is utilised in regions of the roof that are level and those that are open to the elements. However, this sort of waterproofing is quite flexible according to Waterproofing contractors in UAE; however, polyurethane is fairly sensitive to the amount of moisture present in the environment.

When you use this procedure, you need to make sure that you examine the concrete slab to determine the amount of moisture it contains. In the event that this does not happen, you will see that the membranes begin to peel apart or detach from one another over time.

In general, you can inspect any part of the building’s exterior that has to be waterproofed with waterproofing companies in Abu Dhabi. This includes the bathrooms and kitchen, the basement, balconies, decks, green roofs, swimming pools, walls, and water tanks, to name a few of the areas you can examine.

As a result, it is possible to determine the type of waterproofing method that can be applied in every given environment. You could also seek the advice of Waterproofing contractors in UAE to validate whether or not what you are doing is appropriate.